Smoke Machine Automotive, All Accessories & 100ml Smoke Fluid for Cars

• 【Dealing with limited test scenarios and worrying about unsafe overheating?】 Our WIDE COMPATIBILITY & BUILT‑IN SAFETY PROTECTION: Built‑in air pump requires no external air source. Tests EVAP, intake, cooling, EGR, exhaust, crankcase, vacuum leaks & low‑pressure turbo leaks. Works for cars, motorcycles, ATVs, snowmobiles, off‑road vehicles, light trucks and speedboats. Auto overheat‑protection auto shuts down for secure operation.
• 【Annoyed by incomplete kits forcing you to buy extra parts and fluid?】 Our ALL‑IN‑ONE FULL ACCESSORY KIT WITH 100mL LARGE‑CAPACITY OEM‑GRADE SMOKE FLUID: Features one of the most complete accessory sets on the market. Kit includes: built‑in air pump, power cord clamps, one bottle of 100mL OEM‑approved smoke fluid, multiple automotive cone adapters, smoke delivery hose, intake bladder, full‑size automotive cap plugs, plus an extra spare bladder. Safe for all sensors, hoses and seals, delivers up to 240‑min runtime; also accepts baby oil (10‑15 ml per fill). Ready‑to‑use right out of box, saves
• Equipped with EVAP mode, overheat‑protection, adjustable pressure and built‑in air compressor. Simple 12V battery clip power supply for plug‑and‑play operation; tiny leak spots are clearly visible. Great value saves expensive vehicle repair bills.
• 【Isn’t it simple enough even for beginners?】Yes!1.Fill 10ml-15ml smoke fluid to the automotive smoke machine leak detector. 2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector. 3. Connect the detector with the DC 12V battery, and it starts to work. 4.The pipe will be filled with smoke. Check the leak points. Please note:when the smoke from the equipment is not obvious,new oil should be added; When working for more than 3 hours, the smoke oil should be replaced. The filling of new oil should be carried out when the equipment iscooling,10-15ml each time
• 【Aren’t these key rules critical for safe operation?】Never add smoke fluid during operation. Always check the oil level before use. Low oil triggers dry burning, overheating and thermal shutdown; refill only after cooling. Too much oil may stop startup or weaken smoke output.Max fill: 20ml (optimal 15–20ml, do not overfill). The machine stabilizes 30 seconds after startup.If overheated: stop and cool before refilling. If overfilled: power off and drain excess oil below 20ml.Low battery leads to malfunctions; confirm the vehicle battery is fully charged. Use the tester only in well-ventilated o
• 【Don’t you love how fast this vacuum leak detector heats up?】This vacuum leak detector heats up fast. Add 10–15 ml of smoke fluid, connect 12V power, and it produces thick smoke in 10 seconds for immediate leak testing.It is only for 12V DC vehicles; higher voltage will damage internal circuits. A 12V converter is required for 24V vehicles.Use only in well‑ventilated outdoor/open areas. A slight odor during normal operation is harmless.For best performance and long life, use only recommended mineral oil or baby oil. Contact us if you need assistance.

Specifications

• Item Highlight: Fast 10s Car Smoke Leak Tester for Cars, Trucks, ATVs, Boats. Tests EVAP, Intake, Exhaust, Turbo & Vacuum Leaks
• Number of Items: 1
• Unit Count: 1 Count
• Number of Packs: 1
• Included Components: NO